Pinty Crazy Fit Massager Bedienungsanleitung Seite 18

STEP 5
Use the Allen wrench and two
M6x20 hexagonal screws to fasten.
STEP 6
Place the bottom ends of the armrest into
the casing holes into the right and left sides
of the aluminum casing. Making sure that
the screw holes are all aligned in a straight
one, press down on the entire armrest.
STEP 7
Use the Allen wrench and two M6*14
hexagonal screws to fasten.
STEP 8
Connect the upper ends of the
armrest with the bottom ends. Use
the Allen wrench and M6*14 hexago-
nal screws to fasten.