Inhaltszusammenfassung für Pinty Crazy Fit Massager
Seite 1
Crazy Fit Massager LESEN SIE DAS HANDBUCH, BEVOR SIE UNSERES PRODUKT VERWENDEN. Danke für Ihren Einkauf von unserem Produkt Crazy Fit Massager HM01-08VR.Bitte lesen Sie das Handbuch sorgfältig durch, um eine optimale Leistung und Sicherheit zu gewährleisten. BEDIENUNGSANLEITUNG...
Allgemeine Sicherheitshinweise • Verwenden Sie dieses Massagegerät nur gemäß den Anweisungen in diesem Handbuch. Verwenden Sie es nicht für andere Zwecke. • Um Beschädigungen zu vermeiden, darf dieses Produkt nicht auf einen holzgetäfelten Boden gelegt werden. Verschieben oder ziehen Sie das Gerät nicht über eine Oberfläche, die anfällig für Kratzer oder Färbung ist.
Allgemeine Sicherheitshinweise Wenn Sie den Netzstecker aus der Steckdose ziehen, ziehen Sie den Stecker selbst an, anstatt an der Schnur zu ziehen. • Das Netzkabel nicht mit schweren Gegenständen zerkleinern Stoppen Sie die Verwendung, wenn die folgenden Situationen kommen. Schalten Sie die Stromversorgung sofort aus, ziehen Sie den Netzstecker aus der Steckdose und wenden Sie sich an einen autorisierten Fachmann: •...
Installation Schritt 1 Überprüfen Sie vor der Installation die Teile und das Zubehör. Setzen Sie den oberen Teil des Standes in den unteren Teil ein. Schritt 2 Bitte verwenden Sie 2xM6 x 14 Sechs- kantschraube und 2 Grundplatten mit 5 # Innensechskantschlüssel, um das Rückrohr zu verriegeln.
Seite 6
Schritt 5 Verwenden Sie den Innensechskantschlüs- sel und zwei Sechskantschrauben M6x20 zum Befestigen. Schritt 6 Legen Sie das untere Ende der Armlehne in die Gehäuselöcher in die rechte und linke Seite des Aluminiumgehäuses. Stellen Sie sicher, dass die Schraubenlöcher alle in einer geraden ausgerichtet sind, drücken Sie auf die gesamte Armlehne.
Seite 7
Schritt 9 Verwenden Sie den Innensechskantschlüs- sel und die M6 * 14 Sechskantschrauben zum Befestigen. Schritt 10 Die Installation der Hauptteile ist fertig. Schritt 11 Benutzen Sie die Hand, die Metallteile (mit Loch) rechts und links nach außen zu bewegen, verbinden Sie die Löcher mit den Widerstandsbändern.
Seite 8
Installation Zeitanzeige Geschwindigkeitsanzeige Kalorienanzeige ZEIT VERLANGSAMEN MODUS BESCHLEUNIGEN LEISTUNG KALORIE Drücken Sie den Knopf, um den Betrieb zu starten. Kraftknopf: Drücken Sie den Knopf erneut, um sie auszuschalten. Drücken Sie diese Taste für den automatischen Modusknopf: oder manuellen Modus. Stellen Sie die gewünschte Zeit und Geschwindigkeit während Manueller Modus: des Betriebs ein.
Seite 9
Bedienungsanleitung 1. Schließen Sie den Netzstecker an eine Steckdose an. Drehen Sie den Netzschalter am hinteren Ende des Gehäuses des Gerätes. Um das Gerät einzuschalten, drücken Sie den Knopf . Wenn Sie den Knopf ein zweites Mal drücken, wird das Gerät in den „bereithalten“...
Zusätzliche Übungen BASIC Stehen Sie mit beiden Füßen auf der Plattform. Greifen Sie mit den Händen. balancieren Sie sich, wie sich die Plattform bewegt. AUSFALLSCHRITTE Stehen Sie mit beiden Füßen auf der Plattform. Greifen Sie mit den Händen. Legen Sie einen Fuß auf die Mitte der Plattform und schieben Sie Ihr Gewicht auf einen Fuß.
Zusätzliche Übungen VIBRATIONSDREHUNG Legen Sie Ihre Füße auf die kreisförmige Mitte der Stufenplatte, während Sie die Knie leicht gebeugt halten. Für die Unterstützung, halten Sie an den Armlehnen mit Ihren Händen. Während Sie Ihre Fußsohlen in Ihren festen Positionen auf der Plattform halten, verdrehen Sie Ihre Füße von Seite zu Seite.
• Wenn das Netzkabel beschädigt wird, versuchen Sie nicht, es selbst zu ersetzen. Bitte wenden Sie sich direkt an den Hersteller für einen geeigneten Ersatz. Spezifikation Produktname: Crazy Fit Massager Nennleistung: 2000W Nennspannung: ~220-240V Nennfrequenz: 50 HZ Benutzer Max Gewicht: 120 KGS...
Seite 13
Crazy Fit Massager Thank you for purchasing the Crazy Fit Massager HM01-08VR Please read this manual carefully to ensure optimum performance and safety.
Seite 14
• Use this massager only according to the instructions providedin this manual. Do not use it for any purpose other than exercise. • To prevent damage, do not place this product on a woodpaneled floor. Do not shift or drag the unit over any surfacethat is vulnerable to scratching or staining. •...
When disconnecting the power plug from the wall outlet, grip the plug itself, rather than tugging on the cord. • Do not crush the power cord with heavy objects. Stop using the unit if any of the following conditions appear. Turn offpower immediately, disconnect the power plug from the wall outlet, andcontact an authorized repairman: •...
Setup Installation STEP 1 Before installation, check the parts and accessories. Insert the upper part of stand into the lower part. STEP 2 Please Use 2xM6*14 hexagonal screw and 2 base plates with 5#Allen Wrench to lock the back tube. Then Please Use 1xM6*14 hexagonal screw and 1 base plates with 5#Allen Wrench to lock the front tube.
Seite 18
STEP 5 Use the Allen wrench and two M6x20 hexagonal screws to fasten. STEP 6 Place the bottom ends of the armrest into the casing holes into the right and left sides of the aluminum casing. Making sure that the screw holes are all aligned in a straight one, press down on the entire armrest.
Seite 19
STEP 9 Use the Allen wrench and M6*14 hexagonal screws to fasten. STEP 10 Installation of the main parts are finished. STEP 11 Use hand to move the metal parts (with hole) at the right and left sides to the outside, connect the holes with the resistance bands.
Seite 20
Setup Installation Time Display Speed Display Calorie Display SPEED TIME DOWN MODE SPEED POWER CALORIE Press this key to start operation. Power key: Press this key again to turn off. Press this key for Automatic or Mode key: Manual Mode. Adjust your desired time and speed during operation.
Seite 21
Operating Instructions 1. Connect the power plug to an electrical outlet. Flip the power switch on the back end of the unit’s casing. To turn on the unit, press the key. Pressing this key a second time will put the unit in its “standby” mode. 2.
Seite 22
Additional Exercises BASIC Stand with both feet on the platform. Grip its handles with your hands. Balance yourself as the platform moves. LUNGES Stand with both feet on the platform. Grip its handles with your hands. Place one foot on the center of the platform and shift your weight onto one foot.
Additional Exercises VIBRATION TWIST Place your feet onto the circular center of the step plate, while keeping your knees slightly bent. For support, hold on to the armrests with your hands. While keeping your footsoles in their fixed positions on the plate, twist your feet from side to side. Troubleshooting PROBLEM POSSIBLE CAUSE...
• If the power cord becomes damaged, do not attempt to replace it on your own. Instead, contact the manufacturer directly for a suitable replacement. Specifications Product Name: Crazy Fit Massager Rated Power: 2000W Rated Voltage: ~220-240V Rated Frequency: 50 HZ...