Comfort Zone MICROSONIC FACIAL DEVICE Benutzerhandbuch Seite 7

TREATMENTS
SENSITIVE SKIN
1. Cleansing and scrubbing
Hold down the button for 3 seconds to turn on. The blue
LED will come on. Wait for the 2 beeps, then press again
(intermittent blue LED).
Wet the skin with water, put the blade in position 1
and start the treatment. If necessary, wet the skin again.
2. Regenerative massage
Hold down the button for 3 seconds to turn on. Press
once: the green LED will come on (slow flash).
Wet the skin with water, put the blade in position 2
and start the treatment. If necessary, wet the skin again.
3. Product absorption and regenerative massage
Hold down the button for 3 seconds to turn on, then press
it twice: the green and blue LED lights will come on.
Apply your chosen product, put the blade in position 2
and start the treatment.
NORMAL SKIN
1. Cleansing and scrubbing
Hold down the button for 3 seconds to turn on. The blue
LED will come on and stay on.
Wet the skin with water, put the blade in position 1
and start the treatment. If necessary, wet the skin again.
2. Regenerative massage
Hold down the button for 3 seconds to turn on. Press
once: the green LED will come on. Wait for the 2 beeps,
then press again. The green LED will come on (medium
flash). Wet the skin with water, put the blade in position
2 and start the treatment. If necessary, wet the skin again.
3. Product absorption and regenerative massage
Hold down the button for 3 seconds to turn on, then press
it twice: the green and blue LED lights will come on.
Apply your chosen product. Put the blade in position 2
and start the treatment.
HARD SKIN
1. Cleansing and scrubbing
Hold down the button for 3 seconds to turn on. The blue
LED will come on. Wet the skin with water, put the blade
in position 1 and start the treatment. If necessary, wet
the skin again.
2. Regenerative massage
Hold down the button for 3 seconds to turn on. Press
once: the green LED will come on. Wait for the 2 beeps,
then press twice. Wet the skin with water, put the blade
in position 2 and start the treatment. If necessary, wet
the skin again.
3. Product absorption and regenerative massage
Hold down the button for 3 seconds to turn on, then press
it twice: the green and blue LED lights will come on.
Apply your chosen product, put the blade in position 2
and start the treatment.
7