Comfort Zone MICROSONIC FACIAL DEVICE Benutzerhandbuch Seite 6

TECHNOLOGIES
SONIC TECHNOLOGY
image of blade in position 1
Through intense ultrasonic mechanical vibrations, this
technology enables the device to have a deep cleansing
and scrubbing effect. When the SONIC technology is
activated, the BLUE LED light will come on (constant for
normal and hard skin, flashing for sensitive skin).
For this mode, the blade is held in position 1. You must
moisten the parts of your face that you are going to use
the device on with a damp cotton pad or a water-based
solution. Next, pass the blade over the desired areas of
the face, exerting some light pressure. Make repetitive
movements over the desired areas. You will notice that
some of the water evaporates: this is a sign that the
device is working correctly.
This facial treatment should last for 4 minutes.
MICRO TECHNOLOGY
image of blade in position 2
When this technology is activated, the device begins
emitting delicate yet effective microcurrents with alternative
positive and negative impulses. These act on cellular
metabolism and cutaneous circulation.
When the MICRO technology is activated, the green LED
light will come on: fast flash for hard skin, slow flash for
sensitive skin, medium flash for normal skin.
For this mode, the blade is held in position 2. You must
moisten the parts of your face that you are going to use
6
the device on with a damp cotton pad or a water-based
solution. Next, pass the blade over the desired areas of
the face, exerting some light pressure. Make repetitive
movements over the desired areas. During the treatment,
you must make sure that your skin is well-moistened in
order to ensure that there is good electrical contact between
the blade and the skin. You should wet you face several
times during the process. The metal border around the
edge of the device is the electrode for the microcurrent.
This treatment should last for 4 minutes.
SONIC + MICRO TECHNOLOGY
image of blade in position 2
Combining the benefits of both technologies (microcurrents
and ultrasound) is the perfect way to optimize absorption
of cosmetic products that are applied, to regenerate the
skin and to improve the tone of the skin or to help apply
a [ comfort zone ] product.
When the SONIC + MICRO technologies are activated, the
GREEN and BLUE LED lights are both on.
During usage in MICRO and SONIC + MICRO modes, hold
the blade in position 2, apply your selected product and
pass the blade over the area until absorbed. Ensure that
you grip the device well, making sure that you maintain
good contact between your hand and the metal border,
in order to ensure that the microcurrent is being passed
through.
This facial treatment should last for 5 minutes.