PMK Sonic 4000 RF Bedienungsanleitung Seite 16

Sonic 4000 RF
Specifications
Order Number
Electrical Specifications
Attenuation Ratio (±2 %)
Bandwidth (-3 dB)
Dynamic Range
Input Voltage DC (max.) ¹
Input Impedance ²
Output Impedance
Rise Time
Noise (Input)
This product comes with 2 years warranty.
Specifications that are not marked as guaranteed are typical.
¹ ESD protected, IEC 61000-4-2 Contact Discharge Level 2, IEC 61000-4-2 Air Discharge Level 3. See frequen-
cy derating on page 17.
² Referred to probe ground
EN
Mechanical Specifications
Weight (probe only)
Cable Length
Probe input sockets
Output connector
Environmental Specifications
Altitude
Temperature
Range
Maximum
Relative
Humidity
16
operating
non-operating
operating
non-operating
80 % relative humidity for temperatures up to +31 °C,
operating
non-operating 95 % relative humidity for temperatures up to +40 °C
Sonic 4000 RF
885-400-000
10:1
220 Hz to 4 GHz
±8 V (guaranteed)
±20 V (guaranteed)
2 MΩ || 0.6 pF
50 Ω
123 ps
70 nV/sqrt (Hz), f > 10MHz
110 g
1.3 m
0.64 mm square / 0.8 mm round
SMA (male)
up to 2000 m
up to 15000 m
0 °C to +45 °C
-40 °C to +71 °C
decreasing linearly to 40 % at +45 °C