General Reccommendations; Handling; Unpacking - Adler ECO-Serie Installation, Bedienung Und Wartung

ATTENTION
Carefully read this instructions booklet, as it
contains important advice for safe installation,
operation and maintenance. Keep this booklet to
hand in a safe place for future reference by other
operators.
Installation, use and service of the machine can
be performed only by qualified personnel,
especially trained to follow instructions:
WARNING!
 The manufacturer cannot
responsible for injuries or damages of any
kind occurred to persons, machine or
others, due to lack of conformity with the
operation instructions indicated in this
documentation and for abuse, misuse and
lack of conformity with the instructions
indicated in this documentation as well as
installation, uninstall, service, tune-up,
maintenance requiring the removal of the
safety barriers not performed BY TRAINED
AND AUTHORISED SPECIALISTS, will result
in the IMMEDIATE LOSS OF THE WARRANTY.
 Loss of warranty will result also from any
service performed to the machine, when:
Safety barriers are
disconnecting the power line and the water
supply. When any safety provision of the
machine has been bypassed, removed or
excluded.
 Machine is installed
improper or unsafe conditions for lack of
compliance with safety provisions (fuses,
main breaker, ground line, or water inlet
and discharge valves).
 When unauthorized
additions of devices which modify the
operation cycles indicated on the data chart
delivered with the machine.
 When not genuine spare parts are used.
 Installation or storage in inadequate spaces
according to the
manufacturer.
 Machine utilization different from the scope
foreseen as written in the documentation
(ex. Dishes of type or sizes different from
specified).
 Utilization of dispensers with corrosive
products, not pure or dry.
1
- GENERAL RECOMMENDATIONS
be held
removed without
in provisional,
modifications or
indications of
1A – HANDLING
Use suitable means to move the appliance: a
lift truck or fork pallet trucks (the forks should
reach more than halfway beneath the
appliance).
1B – UNPACKING
Before opening the boxes, verify the
conditions and in case indicates damages on
delivery slip. After unpacking, check the
machine conditions, in case the machine is
damaged, communicate immediately to the
dealer.
Do not proceed with the installation if
damages are relevant to operate safely and
wait for qualified and authorized assistance
person. Save boxing components (plastic
bags, expanded polystyrene, nails, etc.)
outside the reach of children for safety
reasons.
1- Wear protective gloves to unpack the
appliance from the boxing. (Fig. 1)
Fig.1
2- Lift the appliance using a lift truck. (Fig. 2)
Fig.2
3- Remove the protection film of the
appliance. (Fig. 3)
Fig.3
5