Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Measurement environment:
Avoid any proximity to explosive and flammable substances, gases and
dust. An electric spark could lead to an explosion or deflagration - danger
to life!
Do not carry out measurements in corrosive environments, the device
could be damaged or contact points inside and outside the device could
corrode.
Avoid working in environments with high interference frequencies, high-
energy circuits or strong magnetic fields, as these can negatively affect
the device.
Avoid storage and use in extremely cold, humid or hot environments and
long-term exposure to direct sunlight.
Only use devices in damp or dusty environments in accordance with their
IP protection class.
If no IP protection class is specified, only use the device in dust-free and
dry indoor rooms.
When working in damp or outside areas, pay particular attention to
completely dry handles on the test leads and test probes.
Before starting the measuring operation, the device should be stabilized at
the ambient temperature (important when transporting from cold to warm
rooms and vice versa)
Maintenance and Care:
Never use the device if it is not completely closed.
Before each use, check the device or any accessories for damage to the
insulation, cracks, kinks and breaks. If in doubt, do not use the device.
Have maintenance and repair work on the device carried out only by
qualified specialists.
To avoid damaging the controls, do not lay the device face down on the
workbench or work surface.
Only clean the housing with a damp cloth and a mild cleaning agent. Do
not use any corrosive abrasives.
Do not make any technical changes to the device.
11
Werbung
