PeakTech 3265 Bedienungsanleitung Seite 10

1. Safety Precautions
This product complies with the requirements of the following directives of the
European Union
compatibility), 2014/35/EU (low voltage), 2011/65/EU (RoHS).
Pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of serious
injury due to short-circuits (arcing), the following safety precautions must be
observed.
Damages resulting from failure to observe these safety precautions are exempt
from any legal claims whatever.
General:

Read these operating instructions carefully and make them available to
subsequent users as well.

It is essential to observe the warning notices and labels on the device, do
not cover or remove them.

Pay attention to the use of the device and only use it in a suitable
overvoltage category.

Familiarize yourself with the functions of the device and its accessories
before you carry out the first measurement.

Do not operate the measuring device unsupervised or only protected
against unauthorized access.

Use the device only for the purpose of its intended use and pay particular
attention to warnings and information on the maximum input values.

Improper use can overload the device, which can destroy or overheat the
device. There is a risk of considerable damage or fire.
Electric safety:

Voltages above 25 VAC or 60 VDC are generally considered dangerous
voltages.

Work on dangerous voltages may only be carried out by or under the
supervision of qualified personnel.

Wear suitable protective equipment when working on dangerous voltages
and observe the relevant safety rules.

Do not exceed the maximum permissible input values under any
circumstances (risk of serious injury and / or destruction of the device)
for CE conformity: 2014/30/EU
10
(electromagnetic