2-Installation Information; Packaging And Unpacking; Installation Area; Electrical Connections - Max Pro 330010 Benutz Und Wartungsanleitung

Installation Information
Packing and Unpacking
The machine is packaged in cardboard with polyester foam inserts to guarantee full integrity durin
transport.
• Handle the packaging according to the instructions.
• Open the packaging and check the integrity of all components. Keep packaging for future moves.
• Lift the machine as indicated and place it in the installation area.

Installation Area

The arranged area must be suitably illuminated and an electrical socket must be available. The resting
surface must be sufficiently ample, even and dry. The fry top must be installed in rooms with non-
explosive environments. In any case, installation must also be performed in consideration of the work
safety laws in force.
Room Conditions Table
Descriptions
Working temperature
Storage temperature
Relative humidity
Dustiness

Electrical Connections

Verify the efficiency of the grounding system in the building. Make sure that line voltage (V) and
frequency (Hz) correspond to those of the machine (See the identification plate and wiring diagram).
The machine is equipped with an electrical cord that connects to a multipolar plug. The plug is to be
connected to a wall switch equipped with a circuit breaker.
Single phase connection
230V – 1Ph
Values
0-35 C (32-95 F)
O O
-15 / +65 O C (-6.8 / +149 O F)
Maximum 80% with 20 °C room temperature
Maximum 50% with room temperature between 20÷60 °C
Less than 0.03 g/m³
DANGER-WARNING:
Electrical
connections to
the supply mains
must be performed
by specialised
personnel.
10
Use and Cleaning Information
Control Descriptions
1) On-Off Button: Press the button to start the machine.
Release to stop the machine.
2) Speed adjustment knob (330015 model only): The speed
adjustment knob both adjusts utensil speed and directly
by-passes to maximum machine speed. To switch from one
condition to another, rotate the knob one notch.
a) Adjustable speed (only use with the whip utensil):
- 330015, it is marked:
b) Maximum speed (only use with the mixer utensil):
- on both 330012 models, it is marked:

Mixer Use

•Insert the mixer utensil in the motor unit and tighten the utensil
lock nut.
• Connect the motor unit to the power plug.
• For 330012 models, turn the speed adjustment knob.
• Firmly hold the mixer lock nut with one hand and the motor unit
handle with the other.
• Insert the mixer in the container with the product to be
processed.
• Press the on button being careful not to near hands or any other
part of the body to the area where the mixer blades are located.
• When finished, release the on button to stop the utensil and
remove the utensil from the container.
DANGER-WARNING:
upper limbs or other parts of the
body to the area where the mixer
utensil blade is located when inserted
in the motor unit. Only clean utensils
removed from the motor unit.
330010 330012
2
1
330012
Never near
11