Safety Devices; Safety Information; Residual Risks - Max Pro 330010 Benutz Und Wartungsanleitung

Safety Devices

330010
Forced retension on button: Releasing the
button cuts off power to the utensil and turns it
off, stopping the utensil
Switch protection: The protection protects the
operator from accidentally starting the utensil in
normal work conditions.

Safety information

• Careful consultation of this manual before installation and use is essential. Continual observance of
the indications found in the manual guarantee personal and machine safety.
• Never tamper with safety devices for any reason.
• Strict observance of the work safety regulations issued by the responsible organisations in each
country is strongly recommended.
• The manufacturer is not liable for damages to persons or things due to the neglect of safety
regulations.
• Correct machine placement, illumination and cleanliness are important conditions for personal safety.
• Do not expose the machine to the elements.
• Machine connections and start-up must only be performed by specialised technicians.
• Make sure that the system specifications of the room where the machine is installed correspond to
the information printed on the plate.
• Make sure the machine is connected to a grounding system.
• The work area around the machine must always be kept clean and dry.
• Use the garments foreseen by work safety regulations.
• This utensil must only be used for its specific purpose; any other use is considered improper and
therefore hazardous.
• Check the suitability and weight of products to be processed; do not overload the machine.
330012
8
• Introducing objects, tools, hands or other things within hazardous parts is forbidden.
• Keep the machine away from children.
• Disconnect the power cord from the electrical socket when the machine is not in use.
• In the event of malfunctions and/or problems, do not attempt to repair the machine. Contact the
authorised dealer.
• Use original spare parts.
• Before cleaning the machine, disconnect the power supply by unplugging the machine.
• Do not clean with high-pressure jets of water.

Residual risks

In accordance with point 1.7.2 "Residual risk warnings" in Machine Directive 98/37/EC and further
amendments, please note that the safety guards, constructed in accordance with said Directive, do
not completely eliminate cutting and trapping risk to upper limbs.
DANGER-WARNINGS: Never near upper limbs or other body
parts to the indicated utensil area when inserted in the motor unit.
Only clean utensils removed from the motor unit.
9