Purpose Of The Manual; Machine And Manufacturer Identification; Machine Descriptions - Max Pro 330010 Benutz Und Wartungsanleitung

Purpose of the Manual

This manual was written by the Manufacturer and is an integral part of machine equipment. During
design and construction the Manufacturer has carefully considered possible hazards and personal
risks that may result from interaction with the machine. In addition to observing the specific laws in
force, the manufacturer has adopted all "exemplary construction technique principles". The purpose
of this information is to advise the users to adopt extreme caution to avoid risks. However, discretion
is invaluable. Safety is also in the hands of all the operators who interact with the machine. Keep this
manual in a suitable place, always within reach for consultation. The following symbols are included to
better stress some passages:
INFORMATION: Indicates particularly important technical information.
DANGER - WARNING: Indicates hazards that may cause serious damages;
attention is required
The following is enclosed with this manual:
• Warranty certificate describing the Manufacturer's warranty conditions.
• Documents that prove conformity with effective health and safety laws.
Contact the Authorised dealer for any service request, information or spare parts order.

Machine and Manufacturer Identification

Machine Model
Model
V Hz
Technical Specifications
Conformity Markings
Serial Number
1N W IPX3 YEAR
Year of Manufacture
4

Machine Descriptions

The mixer range is made up of the following models:
Model 330010 was designed for small processing needs. The utensil has a classic vertical hold shape.
The motor unit is constructed with a plastic structure while the mixing utensil is made up of stainless
steel, aluminium alloy and plastic elements. The machine has only one speed.
Model 330012/330015 was designed for small-medium work needs. The utensil has a classic vertical
hold shape. The motor unit is constructed with a plastic structure while the mixing and whip utensils
are made up of stainless steel, aluminium alloy and plastic elements. The machine has one mixer speed
and adjustable whip speed.
General Informatıon
Noise Level Less than 70 dB(A)
Installation Hand-held utensil
Protection Level IPX3
Electrical Shock Protection Class II
Directive Compliance 93/68/EC - 98/37/EC - 2003/108/EC - 2002/72/EC -
Regulation (EC) n O 1935/2004 - 2004/108/EC - 2006/95/EC
5