Strack PowerMax SN5650-PMO-0065 Bedienungsanleitung Seite 63

PowerMax
I
Operating instructions -- PowerMax cam unit PMO
PowerMax cam unit SN5650-PMO-0065 — SN5650-PMO-0260
9.1 Mounting of the mounting plate at cam widths 0065-02030
(only Premium)
Step 1
Before pushing the mounting plate back in the groove guidance it is absolutely necessary to clean the stop
lug (AN) and the t-nut guidance of both components, in order that the bearing surface for the guide strips
builds a level during the assembly. The mounting plate is constructed in such a manner that the surface
stands about 0.01 till 0.02 back behind the guide strip bearings.
Step 2
Only mount the guide strips at the provided assembly site.
Please that care the screws are secured with the screw locking adhesive Z9093.
picture 1 picture 2
AN
17
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de