Troubleshooting - Klarstein EZ DRY Bedienungsanleitung

TROUBLESHOOTING

Problem
Device cannot be started.
The unit becomes hot or
smells strong.
Clothing is too dry.
Possible cause
Power outage.
The power plug is not in
the socket.
The weight is too high.
The thermal fuse is blown.
The lint filter is dirty.
The air inlet or outlet is
dirty.
There are too many clothes
in the dryer or The clothes
were not sorted properly.
The clothes have not been
removed from the machine
after the drying process is
finished.
The temperature setting is
too high.
Solution approach
Wait until the power
comes back on.
Check the power outlet
and insert the power plug
correctly.
The clothes in the dryer
must not weigh more than
3 kg.
Have the fuse replaced by
a qualified person.
Clean the lint filter after
each use.
Clean the air inlet and
outlet.
Make sure there is not too
much clothing in the dryer.
Remove the clothes from
the machine immediately
after drying.
Observe the label on the
clothes.
EN
29