Installation - Klarstein EZ DRY Bedienungsanleitung

EN
20
• Keep the area around the outlet opening and the adjacent surrounding areas free
of lint, dust and dirt. A clogged opening can reduce the airflow.
• Make sure there are no spray cans with flammable contents near the dryer. If gas
leaks, do not unplug the appliance or press any buttons on the appliance.
• Do not use the appliance if it malfunctions or has missing parts, is damaged,
disassembled, or has broken parts, including a damaged power plug or power
cord.
• Do not operate the product with wet hands or feet.
• Do not discharge the exhaust air into fume cupboards used for appliances that burn
gas or other fuels.
• The door of the dryer can only be opened after the dryer programs have been
completed. Never open the door before a program has been completed as this
could cause burns from hot steam or hot appliance components.

INSTALLATION

• Place the unit in a well-ventilated area with a minimum distance of 10 cm from
walls. It is recommended to keep a minimum distance of 1.5 m from other objects in
front of the dryer to ensure adequate ventilation.
• Place the dryer in the desired location. Then check that the dryer is level. If it is
not, adjust the feet with a screwdriver so that the dryer is level. If the dryer is not
completely straight (the angle of inclination is less than 2°), the dryer may run
unbalanced or sometimes stop operating.
• Do not install the dryer outdoors as it may be damaged by rain or other weather
conditions.
• Make sure that there are no curtains or the like behind the appliance.
• Do not install the unit near gas or other highly flammable substances.