TallyGenicom 9050N Kurzanleitung Seite 26

Chapter 2 Setting Up Your Printer
22
All manuals and user guides at all-guides.com
8 Press the NEXT button until "Off " is
shown on the second line of the interface.
9 Press SELECT.
10 Press START/STOP button to finish.
Use the following procedure to enter the interface menu and add the IP Address
and other related settings.
1 Press the MENU button on the control panel.
2 Press the NEXT button until the text
"Interface Menu" is shown on the second
line of the display.
3 Press the SELECT button to enter the interface menu.
4 Press NEXT until "Network 1 Setup" is
shown on the display.
5 Press SELECT.
6 Press NEXT until "IP ADDRESS" is
shown on the display.
7 Press SELECT.
8 Use NEXT/PREVIOUS buttons to change the first digit.
9 Press SELECT for the next digit.
10 Press SELECT after all digits are set.
Quick Start Guide
DHCP
Off
Menu
Interface Menu
Interface Menu
Network 1 Setup
Network 1 Setup
IP Address