Safety Precautions - Ribimex RIBILAND RBAT20 Bedienungs- Und Wartungsanleitung

smoking and diseases or physical conditions that affect blood vessels and blood transportation, as
well as, high vibration levels and long periods of exposure to vibration.
To help in the prevention and reducing the risk of the whitefinger disease, please note the following:
-- wear gloves and keep your hands warm;
-- maintain a firm grip at all times, but do not squeeze the handles with constant pressure,
-- take frequent pauses
The operator should closely monitor the condition of their hands and fingers, and if any of the
symptoms appear, seek medical advice immediately.
13. Electromagnetic field
Warning! This machine produces an electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical implants to consult their physician and the medical
implant manufacturer before operating this machine

3.5- Safety precautions

1- Initial preparation before operation
- When you operate the tool, always wear full-length trousers, as well as sturdy, closed footwear that
provide good support.
Do NOT operate the tool wearing shorts, when barefoot or wearing open sandals!
- Do not wear loose clothing or jewelry that can be drawn into the moving parts. Keep long hair
away from the moving parts (for ex. put it in a hair net.)
- Wear protective equipment and always wear protective goggles while operating the tool.
Wearing protective equipment such as a dust mask, non-slip footwear, protective gloves, a helmet
and hearing protection (depending on the type and application of the electrical device concerned)
reduces the risk of injury.
- When performing work that generates dust, wear a dust protective mask to prevent dust irritation.
- The product should only be operated when its accessories are in perfect working order.
Any damaged or defective components should be repaired immediately by a qualified technician.
Never attempt to use an incomplete, not fully assembled or modified tool.
Under no circumstances should the tool be operated while safety devices or protective guards or
shields are damaged or if safety equipment such as protective devices is not installed.
- Browse the working area to:
-- remove all objects and foreign materials that may be thrown by the tool,
-- identify hard objects or risk areas to avoid damaging the tool.
2- Before starting the product
- Local or national regulations may limit the use of the product during specific hours of the day and
only by certain users; seek information with your local authority.
- Never operate this product when you are fatigued, ill, or upset, or under the influence of medication
that may make you drowsy, or if you are under the influence of alcohol or drugs
- Only operate the product after completely assembling it.
Do NOT operate product if protective device is not fully and properly assembled!
- Before each use, check the tool for any signs of damage.
3- During use
- Do not carry the charger by the cable.
- Always disconnect the charger from the mains supply in the following circumstances:
-- whenever the charger is not in use, is being carried/transported, or is left unattended.
-- before checking, cleaning or working on the charger
- Always remove the battery from the tool in the following circumstances:
Page 25 / 78