Rotary Commander Rm-X4S; Auxiliary Audio Equipment - Sony CDX-GT980UI Bedienungsanleitung

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SE L
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SEL
PRESET/
DISC
SOURCE
VOL
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• SEL (select) button
The same as the SELECT/ENTER button on
the unit.
• PRESET/DISC control
CD/USB: The same as (1)/(2) (ALBUM –/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
• MODE button
Press to: Select the radio band (FM/MW/LW)/
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
22
D S P L
M O D E
M O D E
S E L
ATT
MODE
DSPL
SEEK/AMS OFF
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SEL).

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX IN jack on the unit and then simply
selecting the source, you can listen on your boat
speakers. The volume level is adjustable for any
difference between the unit and the portable
audio device. Follow the procedure below:
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
"AUX REAR IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 19).
To decrease