Technical Specifications - Philips Lumea BRI959 Bedienungsanleitung

Technical specifications

Rated voltage
Rated frequency
Rated input
Protection against electric shock
Protections rating
Operating conditions
Storage conditions temperature
Storage conditions humidity
Maximum variation of the light
output over the treatment area
Operating pressure
Duration of the pulsetrain
Altitude
Emitted wavelengths
Lithium-ion battery
Optical exposure
Maximum optical energy
Optical homogeneity
Repetition time
Pulse duration
Flash interval
Pulse sequence
Optical spectrum
4222_100_6393_3_DFU-Booklet_A5_v1.indd 27
-
This symbol means that this product contains a built-in rechargeable
battery which shall not be disposed of with normal household waste
(2006/66/EC). We strongly advise you to take your product to an official
collection point or a Philips service centre to have a professional remove
the rechargeable battery.
-
Follow your country's rules for the separate collection of electrical and
electronic products and rechargeable batteries. Correct disposal helps
prevent negative consequences for the environment and human health.
BRI959, BRI956, BRI954, BRI953, BRI950
100V-240V
50Hz-60Hz
70W
Class II
IP 30 (EN 60529)
Temperature: 5 °C to 35 °C
Relative humidity: 15% to 90% (non condensing)
-25° to +70°C
Less than 90% (non condensing)
<20%
700hPa-1060hPa
Single pulse
Max. 3000m
565 to 1400 nm
2 x 3.6 Volt 1000 mAh
2.4-6.5 J/cm2
4.8 - 23 J
Max. +/- 20% deviation from average optical exposure in
treatment area
1-3.5 s
<2.5 ms
Between 1-3.5s depending on battery/mains connected use
Single pulse
560-1200 nm
English 27 27
31/10/16 15:17