Power Saving; Light Sensor; Colour System; Product Information - Sony BRAVIA KDL-46T35 Serie Bedienungsanleitung

Power Saving

Light Sensor

AV2 Output
Quiet Power On
Speaker
Audio Out

Colour System

Product Information

26
GB
On Timer
Sets the timer to turn on the TV from standby mode.
"Day": Selects the day on which you want to activate the On Timer.
"Time": Sets the time to turn on the TV.
"Duration": Selects the time period after which the TV automatically switches to
standby mode again.
"Volume Set-up": Sets the volume for when the timer turns on the TV.
Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital channels,
the clock cannot be adjusted manually since it is set to the time code of the
broadcasted signal.
Selects the power saving mode to reduce the power consumption of the TV.
When "Picture Off" is selected, the picture is switched off and the
indicator on the TV (front) lights up in green. The sound remains unchanged.
"On": Automatically optimizes the picture settings according to the ambient light in
the room.
"Off": Turns off the "Light Sensor" feature.
Note
Be sure not to put anything over the sensor, as its function may be affected. See page 11 for
further information on the sensor.
Sets a signal to be output through the socket labelled
TV. If you connect a VCR or other recording equipment to the
you can then record from the equipment connected to other sockets of the TV.
"TV": Outputs a broadcast.
"AV1": Outputs signals from equipment connected to the
"AV6": Outputs signals from equipment connected to the
"Auto": Outputs whatever is being viewed on the screen (except signals from the
/ 3, HDMI IN 4, HDMI IN 5 and PC
Sets the volume control at a low level when the TV is first turned on, gradually
increasing the sound to a preset level.
Switches on/off the TV's internal speakers.
"On": The TV speakers are turned on in order to listen to the TV's sound through
TV's speakers.
"Off": The TV speakers are turned off in order to listen to the TV's sound only
through your external audio equipment connected to the audio output sockets.
"Variable": The audio output from your audio system can be controlled by the TV's
remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume
control to adjust the volume (and other audio settings) through your audio system.
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43",
or "PAL60") according to the input signal from the input source.
Displays your TV's system information.
(Picture Off)
/ 2 on the rear of the
/ 2 socket,
/ 1 socket.
/ 6 socket.
sockets).