Technical Data; General Description - Fromm&Starck STAR SSD 01 Bedienungsanleitung

6
U S E R M A N U A L

TECHNICAL DATA

Parameter description Parameter value
Product name Sit-Stand Height
Adjustable Desk
Model STAR_SSD_01 STAR_SSD_02
Dimensions [mm] 920x757x420
Weight [kg] 16.9 22.04
Height adjustment 165-415 165-415
range [mm]
Working surface 900 x 500 900 x 500
dimensions [mm]
Maximum working 15
surface load [kg]
Keyboard tray 900 x 190 900 x 190
dimensions [mm]
Maximum keyboard 2
tray load [kg]
Maximum total load 15
of the entire stand
[kg]
Worktop thickness 15
[mm]

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
EN
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to SIT-STAND HEIGHT ADJUSTABLE
DESK.
2.1. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
e) Keep packaging elements and small assembly parts
in a place not available to children.
f) Keep the device away from children and animals.
g) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.2. PERSONAL SAFETY
a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
2.3. SAFE DEVICE USE
a) Do not overload the device.
b) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
c) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
d) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
e) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
f) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
g) Keep the device away from sources of fire and heat.
h) Do not overload the device.
EN
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is an extension for adjusting the computer's
height. It is intended to facilitate the adjustment of the
computer's position to the sitting or standing (and vice
versa) position of the person while maintaining the
principles of work ergonomics.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 20).
STAR_SSD_01
A. Base
B. Foot extension
C. Countersunk screw
D. Flat head screw
E. Cable clip
F. Cable tie
G. Keyboard tray
H. Bracket
I. Allen key
J. Allen screw with washer and nut
STAR_SSD_02
A. Base
B. Bracket
C. Kayboard tray
D. Flat head screw
E. Allen key
F. Cable clip
G. Cable tie
3.2. PREPARING FOR USE
ASSEMBLING THE APPLIANCE
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 21-26).
STAR_SSD_01
1. Be careful when unpacking the product.
CAUTION! Moving parts - risk of injury or crushing.
2. Turn the base upside down. Fasten the feet extension
(B) to the frame with the screws (C).
3. Press the levers on both sides of the base, then raise
the base.
4. Mount the brackets (H) to the keyboard tray with the
screws (C).
5. Mount the keyboard tray to the base using the
screws (D).
6. Position the computer with accessories on the base.
WARNING! Do not place the monitor or laptop on
the edges of the base. Slowly raise the base itself to
avoid excessive shaking of computer components -
risk of falling and damage!
7. Fasten the mouse and keyboard cables to the base
using the clip (F).
7
8. Attach the base to the desk / table using a screw with
washer and nut (J). Fasten the cables with cable ties.
Important! After installation, the cables should not
be tense to allow free lifting and lowering of the
base. Route the cables so as to prevent them from
being crushed / trapped when adjusting the base.
STAR_SSD_02
1. Be careful when unpacking the product.
CAUTION! Moving parts - risk of injury or crushing.
2. Cut the straps, press the lever on both sides and raise
the base.
3. Attach the brackets (B) to the keyboard tray (C) with
the screws (D).
4. Slide the keyboard tray into the mounting position
and secure with screws using an Allen key.
5. Position the computer with accessories on the base.
WARNING! Do not place the monitor or laptop on
the edges of the base. Slowly raise the base itself to
avoid excessive shaking of computer components -
risk of falling and damage!
6. Fasten the mouse and keyboard cables to the base
using the clip (F).
7. Attach the base to the desk / table using a screw with
washer and nut (J). Fasten the cables with cable ties.
Important! After installation, the cables should not
be tense to allow free lifting and lowering of the
base. Route the cables so as to prevent them from
being crushed / trapped when adjusting the base.
3.3. DEVICE USE
To raise or lower the base, grasp the levers on both sides of
the base and pull them up to release the lock. Set the base
to the desired height and lock it by releasing the levers -
the tabs must enter the groove.
IMPORTANT! Raise and lower the base slowly. Watch out
for fingers - risk of crushing and / or injury!
3.4. CLEANING AND MAINTENANCE
a) Use only non-corrosive cleaners to clean the surface.
b) The device must be regularly inspected to check its
technical efficiency and spot any damage.
c) Use a soft, damp cloth for cleaning.
d) Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
e) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.