Lilin iMEGAPRO IPR7722ESX Schnellinstallationsanleitung Seite 11

Configuring IP Addresses via Web Interface
To change an IP address via web interface, type the default IP address
(192.168.0.200) in the Internet browser and follow the steps below:
1. Login to the H.264 Full HD IP camera by the default username
"admin" and default password "pass"
2. Click Basic Mode configuration hyperlink.
3. Click Network->General hyperlink.
4. Change the IP address, subnet mask, gateway, or HTTP port for
the IP camera.
5. Click Submit to verify the settings.
Internet Browser Settings & Application Required
Make sure your Internet browser allows the signed ActiveX plug-in to
work on your computer. Set "Download Signed ActiveX plug-in
controls" to "Prompt" and "Run ActiveX control and plug-in" to
"Enable". You can set this option via Internet Explorer-> Tools->
Options-> Security Settings.
- 8 -