Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• INSTALLATION
Selection of installation equipment
o
Cut out the work surface according to the sizes shown in the drawing.
o
For the purpose of installation and use, a minimum of 5 cm shall be maintained
around the hole.
o
Be sure the thickness of the work surface is at least 30 mm. Please select heat-
resistant and insulated work surface material (wood and similar fibrous or hygro-
scopic material shall not be used as a work surface material unless impregnated) to
avoid electric shock and deformation caused by the heat radiation from the hot-
plate as shown below:
Note:
o
The safety distance between the sides of the hob and the inner surfaces of the
worktop should be at least 3 mm.
L (mm)
W (mm)
590
520
o
Always make sure that the ceramic cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the ceramic cooker hob is in a good working
condition as shown below.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
H (mm) D (mm) A (mm) B (mm)
55
51
X (mm)
560 +4
490 +4
50 min.
+1
+1
106
F (mm)
3 min.
Werbung
Inhaltsverzeichnis
