LeMond Fitness Revmaster Bedienungsanleitung Seite 10

INSTALLATION INSTRUCTIONS
Water Bottle Cage
Rear Base
B . Assemble the Bike
5. With the help of an assistant, lift the bike up and off the pallet.
6. The base that has wheels is the
front base and connects to the
main frame below the flywheel.
Ensure that the wheels are
facing out, and align the 2 holes
in the front base with the 2
holes in the frame. Insert a
mounting bolt into the top of the
hole and push the bolt through the base and the main
frame. Use the 8-mm hex key and wrench tool to secure the
mounting bolt nut. Repeat this procedure for the rear base.
Note: If you are having difficulty threading the nut on the
bolt, prop up the main frame using the inclosed wooden
blocks to allow accessibility to the nut.
Page 4
Seat
Pedals
4x Handles Seat Post
Handlebar Assembly
Front Base
Handlebar Post
4x Mounting Bolts
3x Hex Keys
Wrench Tool