Use Of The Oven; Electronic Timer; Setting The Time - Inventum VFG6034WGRVS Gebrauchsanleitung

5

use of the oven

Important! In cookers equipped with the electronic timer, the time "0.00" will start flashing in the display field upon
connection to the power supply. Set the timer with the current time. If the current time is not set, operation of the oven is
impossible.

ELECTRONIC TIMER

functions
OK - key for function selection
< - key for [ - ]
> - key for [ + ]

SETTING THE TIME

After connection to the mains or reconnection after a power cut the display shows flash
0.00.
• Press the [ OK ] key to set the current time for the first time. The display will show the
symbol .
• Set the current time using the keys [ < ] or [ > ].
• A few seconds after the time has been set the new data will be saved.
• To adjust the time, press the keys [ < ] and [ > ] at the same time. The time will blink.
After that the time can be adjusted.
• A few seconds after the time has been set the new data will be saved. The current time is now adjusted.
Caution! The oven can be used after the symbol
TIMER
The timer can be activated at any time, regardless of the status of other functions. The timer can be set from 1 minute up to
23 hours and 59 minutes.
• Press the [ OK ] key. The symbol
• Set the timer using the keys [ < ] and [ > ]. The display shows the set time and the
symbol indicates the timer is activated.
As soon as the set time has passed an alarm signal will sound and the symbol
flashes.
• Press any key to turn the alarm signal off. The symbol
time is shown.
Caution! If the alarm signal is not turned off manually, it will be turned off automatically after approx. 7 minutes.
SEMI - AUTOMATIC OPERATION
Use this function if the oven is to be switched off at a given time.
• Set the oven function knob and the temperature knob to the setting at which you
want the oven to operate.
• Press the [ OK ] key until the display shows
• Set the required preparation time using the keys [ < ] or [ > ]. The preparation time
can be set from 1 minute to 10 hours.
• The set time will be saved in the memory after a few seconds. The display shows
to indicate the function semi-automatic switch off is activated and the current time
is shown.
• When the set time has passed the oven is switched off automatically, the alarm signal
is activated and the signal function
• Press any key to turn the alarm signal off. The signal function
• Turn the knobs for the oven function and the temperature to the off setting [ 0 /  ].
appears in the display.
flashes in the display.
disappears and the current
.
auto dur
is flashing.
auto
auto
disappears and the current time is shown.
auto
33
English •