Connecting An External Device; Connecting Using An Hdmi Cable (Capable Of Dolby Atmos Decoding And Playback) - Samsung HW-Q600A Vollständiges Handbuch

05 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired connection or Bluetooth connection to play the external
device's sound through the Soundbar.
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
Pre-connection Checklist
• Dolby Atmos® and DTS:X are supported in HDMI mode only.
• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
• Make sure that the content supports Dolby Atmos®.
External Device
1. Connect an HDMI cable from the HDMI port on the back of the product to the HDMI OUT port on
your digital device.
2. Connect an HDMI cable from the HDMI TO TV (ARC) port on the back of the product to the HDMI IN
port on your TV.
3. Press the (Source) button on the top panel or on the remote control, and then select "HDMI".
4. "HDMI" mode is displayed on the Soundbar display panel and sound plays.
HDMI OUT
HDMI Cable
HDMI IN
(ARC)
Top of the Soundbar

ENG - 17


HDMI Cable
DIGITAL AUDIO IN (OPTICAL)
Bottom of the Soundbar
HDMI
HDMI TO TV
(ARC)

HDMI