Operation - Polti VAPORELLA INOX 3000 Handbuch

ENGLISH

OPERATION

1• Unscrew the patented safety cap and fill the
generator with about 0,9 litres of normal
tapwater, taking care not to overfill.
3• Plug in the power supply, push the gene-
rator and iron on/off switch (3-2),
checking that they light up when pressed
down.
4• Wait for the generator on/off switch (2) to
go out (8 min. approx).
Then push the steam release switch (8) on
the handle of the iron, so as to allow steam
to escape from the holes on the sole of the
iron.
5• By turning the steam flow control knob (9)
you can vary the amount of steam accor-
ding to the type of textile to be ironed (more
or less delicate).
2• Set the temperature of the
iron by turning knob (7) on
the iron to the COTTON - LI-
NEN position.