Usage - Mitsubishi Daiya SAF150E6 Anwenderhandbuch

Usage

1. Operation indicator
The operation indicator lights up while the
ventilator is running.
The operation indicator turns off when the
ventilator stops.
2. Operation switch
Turn the operation switch to the "1" (On)
position to start operation.
Turn the operation switch to the "0" (Off)
position to stop operation.
3. Air volume adjusting switch
Select either "High" air volume or "Low" air volume.
4. Function select switch
Select either "HEAT EXCH." (Energy recovery) or "NOML VENT." (Normal ventilation) according
to the season.
For cooling/heating in summer/winter
For middle seasons spring/autumn
When the room is heated in winter, do
not operate the ventilator in "normal
ventilation" mode.
Doing so may cause dew to form, resulting in electric
shock or fire.
Request
• In order to prevent bugs from entering when stopping the operation, first operate
the ventilator in the energy recovery mode for at least 30 seconds, and then turn
the switch to the "Off" position to stop operation.
Information
• Heat exchange elements may emit odor when you use them for the first time. This
phenomenon is normal and does not indicate an abnormality or a failure.
10
Caution
1. Operation indicator
2. Operation switch
3. Air volume adjusting
switch
4. Function select
switch
Function select switch
Select "HEAT EXCH." (Energy recovery)
Select "NOML VENT." (Normal ventilation)
0 1
LO HI
NOML HEAT
VENT. EXCH.