Hauck Open Top Swing Gebrauchsanweisung Seite 13

ASSEMBLY:
When assembling the parts, please make sure that "A" parts are fi tted to "A" parts and
"B" parts are fi tted to "B" parts.
1. Connect left base bar ( 13 ) to front center bar ( 14 ).
2. Connect right base bar ( 10 ) to front center bar ( 14 ).
3. Push back base bar ( 11 ) onto base bars (13 ) and ( 14 ).
4. Insert left bar ( 16 ) into back bar ( 9 ).
5. Insert right bar ( 7 ) into back bar ( 9 ).
6. Fit left bar ( 16 ) and right bar ( 7 ) connected by back bar ( 9 ) onto base bars (
13 ) and (10 ).
7. Connect motor housing ( 1 ) to left bar ( 16 ).
8. Connect motor housing ( 5 ) to right bar ( 7 ).
9. Insert left rocking bar ( 2 ) and right rocking bar ( 6 ) into round holes in seat
( 4 ) and fasten.
10. Push crossbars of back adjuster ( 8 ) onto rocking bars ( 2 ) and ( 6 ).
11. Push play tray ( 15 ) onto the right side of rocking bar ( 6 ), fold downwards
and snap into place on left side.
12. Fix play element ( 3 ) to play tray.
13. Engage rocking bars ( 6 ) and ( 2 ) in the holes in the motor housing ( 1 ) and
swivel housing ( 5 ).
14. Open belt system ( 17 ) and feed through cover ( 12 ).
Now check that all joints are properly engaged and that the required stability is
achieved.
GB
13