ChiQ U58G5500 Bedienungsanleitung Seite 28

Menu Operation
■
HDMI EDID (In HDMI mode): Switch EDID Version, Select Enhanced when source
signal is transferred by HDMI2.0 specification and Select Standard when source
signal is transferred by HDMI1.4 specification.
■ Environment: You can select Home or Store for the TV environment. It is
recommended to set the TV to Home Mode.
■
Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
Configuring the Lock Menu
■
Lock System: The feature can prevent unauthorized operating the TV set, unless
entering 4-digit password.
Press 0-0-0-0 using Direct Channel Selection Buttons
(0-9). (This is default password.)
NOTE:
 If you forget your password, use the factory password
1-2-2-5, you can then gain access to change your
password if necessary.
■ Set Password: Press the OK button to enter submenu.
You can set your private password. Press the number
buttons on the remote control to set the new password.
When the new password has been input twice, the
setting is finished successfully. The TV will go back to
previous menu.
■ Block Programme (In ATV/DTV mode): Press
▲/▼buttons to select which program will be blocked
then press Yellow to set block. Press the Yellow
button again to unblock it. (Only available when Lock System set to on)
■ Parent Lock (In DTV mode): Press the ▲/▼ buttons to select age rating. This
feature can prevent children watching adult's TV program, according to the rating
limit set.
26
Lock
Setting /
Lock System
Set Password
Block Programme
Parent Lock
On
Off