ChiQ U58G5500 Bedienungsanleitung Seite 23

Menu Operation
Configuring the Sound Menu
■
Sound Mode: You can select a sound mode to suit your personal preferences.
When the sound mode is set to User :
- Surround Sound: Press ▲/▼ buttons to
select Surround Sound, you can select Off, Low,
Middle, and High.
- Dialog Enhancer: Press ▲/▼ buttons to select
Dialog Enhancer, you can select Off, Low, Middle, and
High. The dialogue enhancer feature allows you to
clearly hear the dialogue voice of the TV broadcast,
thus avoiding the background sound effects being too
loud and the dialogue voice being too small.
- AVC (Auto Volume Control): Press ▲/▼ buttons to
select Auto Volume Control, you can select Off, Low,
Middle, and High.
- Seven-stage equalization setting: Press the
▲/▼buttons to select: 120 Hz, 300 Hz, 500 Hz, 1 KHz,
3 KHz, 6 KHz or 12 KHZ, and then press the ◄/► buttons to adjust the frequency
equalization of the sound.
■
Balance: You can adjust the sound balance of the
speakers to preferred levels.
■
SPDIF Mode: Press ◄/► buttons to select SPDIF Type. You can select "PCM" or
"Auto". SPDIF (Sony Philips Digital Interface) provides digital audio output to
speakers and various digital devices such as A/V Receivers and Home Theaters
which reduces interference and distortion.
■
AD Switch (In DTV mode) *this is only available in some countries, mainly in
North America and Europe. This is an auxiliary audio function that provides an
additional audio track for visually challenged persons. This function handles the
Audio Stream for the AD (Audio Description), when it is sent along with the Main
audio from the broadcaster. Users can turn the Audio Description On or Off and
control the volume.
■
AD Volume: When the AD Switch is set On, the AD Volume can be adjusted.
■
Audio Delay:
OK button to enter sub menu. You can select "SPDIF Delay" or "Speaker Delay".
Correct audio-video sync problems, when watching DTV and when listening to
digital audio output using an external device such as an audio receiver
(0ms~250ms).
■
Sound Reset : Reset all sound settings to the factory defaults.
Press the▲/▼buttons select the Audio Delay, then press the
21
Sound
Setting /
Sound Mode Standard
Balance
SPDIF Mode
AD Switch
AD Volume
Audio Delay
Sound Reset
0
AUTO
On
30