ChiQ U58G5500 Bedienungsanleitung Seite 16

Basic Operation
•
Select the antenna type (Air, Cable and Satellite).
Press the ▲/▼
(For more detailed information, please refer to Channel menu → Auto Tuning).
Press the ► button to go to the next step. Press the ◄ button to go to previous step.
•
The TV starts Auto Tuning.
NOTE:
 If the TV doesn't receive any channels, please check your aerial connection or the
country you selected, and then try an auto search again.
 If the TV just receives some of the channels, it means the aerial's reception isn't good
enough and an antenna service is recommended.
Programme Selection
• Using the
Press P to increase channel number.
Press P to decrease channel number.
Using 0- 9 Digital Buttons.
•
You can select the channel number by pressing 0 to 9. Example:
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume Adjustment
• Press the +
• If you want to switch the sound OFF, press the
• You can release mute by pressing the
Changing the Input Source
1. You can select the input source by pressing the SOURCE (
control.
2. Press the arrow button to cycle through the input source, and press the OK button to
confirm your choice.
buttons to select the tuning modes and then press the OK button.
on the remote control.
- on the remote control to adjust the volume.
.
or increase the volume.
14
) button on the remote