IKEA FINSMAKARE Handbuch Seite 8

ENGLISH
extractor hood to
exhaust ducts carrying
combustion fumes
(boilers, fireplaces, etc.).
• If the extractor is used
in conjunction with non-
electrical appliances (e.g.
gas burning appliances),
a sufficient degree
of aeration must be
guaranteed in the room
in order to prevent the
backflow of exhaust gas.
When the cooker hood
is used in conjunction
with appliances supplied
with energy other than
electric, the negative
pressure in the room
must not exceed 0,04
mbar to prevent fumes
being drawn back into the
room by the cooker hood.
• The air must not be
discharged into a
flue that is used for
exhausting fumes from
appliances burning gas or
other fuels.
• If the supply cord is
damaged, it must be
replaced from the
manufacturer or its
service agent.
• Connect the plug to a
socket complying with
current regulations,
located in an accessible
place.
• With regards to the
technical and safety
measures to be adopted
for fume discharging it is
importat to closely follow
the regulations provided
by the local authorities.
WARNING: Before
installing the Hood,
remove the protective
films.
• Use only screws and small
parts in support of the
hood.
WARNING: Failure
to install the screws
or fixing device in
accordance with these
instructions may result
in electrical hazards.
• Connect the hood to the
power net by using a
bipolar switch having a
contact gap of at least 3
mm.
• Do not look directly at
8