Operating Manual / Piston Pressure Switch
4 Transportation and storage
4.1 Transportation
4.1.1 Instructions relating to transportation
General safety instructions should be observed during transportation.
4.1.2 Dimensional and weight specifications
Dimensional and weight specifications can be found in the technical data for the respective
pressure switch.
CAUTION
Impacting and severe vibration should be avoided where possible during
transportation.
4.2 Storage
The pressure switch can be stored at the factory for up to six months in compliance with the
following criteria:
Do not store in the open. Always store under a roof or in a well-ventilated room.
Protect against rising damp: store in a shelf system or on a wooden pallet.
Cover with film to protect against dust and dirt.
Following opening, transportation packaging should be closed again correctly for storage.
NOTE
HYDROPA
months or sea transportation.
8
®
must be consulted in the case of storage for periods longer than six
BA-KDS/GB/2010-REV1