B&R Industries ACOPOSinverter P74-Serie Anwenderhandbuch Seite 164

Programming
Parameters described in this page can be accessed by: DRI- > MOn- > dGt- > AFI-
Code Name / Description
SF00 [SAFF Subcode 0]
Safety fault subregister 00.
Application auto test error register.
Bit0: Reserved
Bit1 = 1: Ram stack overflow
Bit2 = 1: Ram address integrity error
Bit3 = 1: Ram data access error
Bit4 = 1: Flash Checksum error
Bit5: Reserved
Bit6: Reserved
Bit7: Reserved
Bit8: Reserved
Bit9 = 1: Fast task overflow
Bit10 = 1: Slow task overflow
Bit11 = 1: Application task overflow
Bit12: Reserved
Bit13: Reserved
Bit14 = 1: PWRM line is not activated during initialization phase
Bit15 = 1: Application hardware Watch Dog is not running after initialization
SF01 [SAFF Subcode 1]
Safety fault subregister 01.
Logical input diagnostics error register.
Bit0 = 1: Management - state machine error
Bit1 = 1: Data required for test management are corrupted
Bit2 = 1: Channel selection detected error
Bit3 = 1: Testing - state machine detected error
Bit4 = 1: Test request is corrupted
Bit5 = 1: Pointer to test method is corrupted
Bit6 = 1: Incorrect test action provided
Bit7 = 1: Detected error in results collecting
Bit8 = 1: LI3 detected error. Cannot activate safe function
Bit9 = 1: LI4 detected error. Cannot activate safe function
Bit10 = 1: LI5 detected error. Cannot activate safe function
Bit11 = 1: LI6 detected error. Cannot activate safe function
Bit12 = 1: Test sequence updated while a diagnostic is in progress
Bit13 = 1: Detected error in test pattern management
Bit14: Reserved
Bit15: Reserved
[SAFF Subcode 2]
SF02
Safety fault subregister 02.
Application Watchdog Management detected error register.
Bit0 = 1: Fast task detected error
Bit1 = 1: Slow task detected error
Bit2 = 1: Application task detected error
Bit3 = 1: Background task detected error
Bit4 = 1: Safety fast task/input detected error
Bit5 = 1: Safety slow task/input detected error
Bit6 = 1: Safety app task/input detected error
Bit7 = 1: Safety app task/treatment detected error
Bit8 = 1: Safety background task detected error
Bit9: Reserved
Bit10: Reserved
Bit11: Reserved
Bit12: Reserved
Bit13: Reserved
Bit14: Reserved
Bit15: Reserved
SF03 [SAFF Subcode 3]
Safety fault subregister 03.
Bit0 = 1: Debounce time out
Bit1 = 1: Input not consistent
Bit2 = 1: Consistency check - state machine detected error
Bit3 = 1: Consistency check - debounce timeout corrupted
Bit4 = 1: Response time data detected error
Bit5 = 1: Response time corrupted
Bit6 = 1: Undefined consumer queried
Bit7 = 1: Configuration detected error
Bit8 = 1: Inputs are not in nominal mode
Bit9: Reserved
Bit10: Reserved
Bit11: Reserved
Bit12: Reserved
Bit13: Reserved
Bit14: Reserved
Bit15: Reserved
164 ACOPOSinverter P74ACOPOSinverter P74New Anwenderhandbuch 2.60 Übersetzung der Originalbetriebsanleitung
(1)
(1)
(1)
(1)