Viva VVA61E150 Gebrauchs- Und Montageanweisung Seite 29

Installation inside the wall cupboard
8. Cut the wall masking strip down to size if
necessary and screw it onto the wall
cupboard.
Attaching a handle to the vapour
extractor:
K A handle can be attached to the vapour
extractor.
1. Use the enclosed template
the 3 mounting points on the handle
and start the hole with a gimlet.
Details for drilling:
l 2 mm – max. 10 mm deep.
2. Align handle and attach it to the
extractor with the 3 enclosed screws.
O
to mark
III
29