Basic Parameters; Installation; Adjustable Feet - Gastrodomus TR180 Gebrauchshandbuch

The machine is based on adjusting the speed of the chain network to control the color of baked bread. The
guiding network rack is designed in the front of the machine, which can lead the toast in smoothly. There is a
plate under the network, in order to collect scraps. The pre-discharge and after-discharge are also set, which
can be transformed by the user at will for convenience. To enable this new product's performance well and
give full play, and reduce unnecessary losses and injuries, please read this manual carefully before use, also
keep it well for reference in the future.

Basic parameters

Model
Volts（V）
HP（W）
Frequency（Hz）
Length（L）mm
Width（B）mm
Height（H）mm
Efficiency（Slices/Hr）

Installation

1. Open the package and take out the following annexes to install: An under-plate, An after-plate, A guiding
network, Four adjustable feet.
2. Firstly, turn right of the four adjustable feet into the screw holes in the bottom of furnace. Then, place in a
suitable-height operation platform, adjust the feet in order to keep the furnace even and safe operation.
3. According to the following sketch, put the Hooks in sides of the network into installation holes.
Installation holes
Guiding network
4. Install the under-plate: Hang the under-plate onto the Hooks according to the arrow direction.
TR180
220
1340
50
290
420
380
150

Adjustable feet

TR260
220
1940
50
370
420
380
300
TR360
220
2640
50
470
420
380
450