Werbung
9.
Brief description:
9.1.
Type and class of device or component: Non standard coupling ball 50
9.2.
Characteristic values: 5134 A50-X
9.2.1.
Primary values:
D....8.30.... kN
Dc................ kN S.....70..... kg
U...............tonnes
Alternative values: Not applicable
D............. kN
Dc................ kN S................ kg
U...............tonnes
9.3.
For Class A mechanical coupling devices or components, including towing brackets:
Vehicle manufacturer's maximum permissible vehicle mass: 2130 kg
Distribution of maximum permissible vehicle mass between the axles: 980 kg /
1055 kg
Vehicle manufacturer's maximum permissible towable trailer mass: 1400 kg
Vehicle manufacturer's maximum permissible static mass on coupling ball: 70 kg
Maximum mass of the vehicle, with bodywork, in running order, including coolant,
oils, fuel, tools and spare wheel (if supplied) but not including driver: 1970 kg
Loading condition under which the tow ball height of a mechanical coupling device
fitted to category M
vehicles is to be measured -see paragraph 2 of annex 7,
1
appendix 1: According to paragraph 2 of annex 7 appendix 1
9.4.
For class B coupling heads, is the coupling head intended to be fitted to an unbraked
O
trailer Yes/No
1
10.
Instructions for the attachment of the coupling device or component type to the vehicle and
photographs or drawings of the mounting points given by the vehicle manufacturer: See
manufacturer's documentation
11.
Information on the fitting of any special reinforcing brackets or plates or spacing components
necessary for the attachment of the coupling device or component: Not applicable
12.
Additional information where the use of the coupling device or component is restricted to
special types of vehicles - see annex 5, paragraph 3.4: Not applicable
EAM240276
An executive agency of the Department for Transport
January 2011 Issue 3
REG 55.01 STU
V.................. kN
V.................. kN
09-Aug-11
2
3
4
Date de création: 18/10/16
Indice d'évolution: IND.B
2
3/8
Werbung
