LENCO Xemio-760BT Benutzerhandbuch Seite 25

To Reset:
• Use a 2mm stick or similar object (like tooth stick), and carefully insert
the stick, use dull side, into the earphone jack hole until you feel to hit
the end. Actually that is the tact switch button surface.
• Then add a bit of force and you will get a click sound and feeling
return from switch. The device is reset and restart in seconds.
Important: Do not reset the device if it is proper working.
19. Trouble Shooting
Unit cannot turn ON
No sound is heard from
headphone.
Characters in LCD are
corrupted
Download of media
files fails.
Bluetooth can't pair
and connect to a
Bluetooth receiver
device
20. Frequently Asked Question
Where can I find
updates and
download?
21. Specification
Dimension
Weight
LCD
Earphone Impedance 32 Ohm
Internal Memory
Memory Card Slot
• Check battery is it charged with enough
energy.
• Check whether Volume is set "0" and
connect the headphone plugs firmly.
• Check whether the headphone plug is dirty.
• Corrupted MP3 may make a static noise and
the sound may cut off. Make sure that the
music files are not corrupted.
• Check whether the right language has been
selected.
• Check whether USB cable is damaged and is
connected properly.
• Check whether driver is installed correctly.
• Check whether the player's memory is in full.
• Make sure Bluetooth receiver supports
A2DP.
• Make sure Bluetooth receiver is placed
within connection distance in 5 ~ 10 meters.
• Make sure Bluetooth receiver has already
entered into pairing mode.
Check for latest Software update at
http://www.lenco.com/support/firmware/
95mm (H) x 44.5mm (W) x 9.0mm (D)
30g
2.0 inches, Resolution (RGB) 176 x 220
See carton or giftbox
Micro SD Card
25