THOMSON MIC120BT Bedienungsanleitung Seite 18

3. Press [OK].
4. Press / to select the station
5. Press [OK].
To tune automatically, Press and hold the
quickly. "STEREO" is shown when a stereo broadcast is being received.
Memory presetting
You can preset up to 30 FM stations.
1. Press [PLAY MENU] to select "AUTO SCAN". Then press [OK],the tuner presets all the
stations it can receive into the channels in ascending order.
2. To cancel, press
Attention: For optimal reception, fully extend and adjust the position on the antenna.
RDS Broadcasting
This system can show the text data transmitted by the radio data system (RDS) available in
some areas.
Press [DISPLAY].
PS :
PTY :
FREQ :
Note: RDS may not be available if the reception is poor.
Clock and timers
Setting the clock
This is a 24-hour clock
1. Press [SETUP] repeatedly to select "CLOCK".
2. Press / to set the time and then press [OK]
Sleep timer
The sleep timer switches off the system after the set time.
1. Press [SETUP] to select "SLEEP"
2. Press / to setting (in minutes) and then press [OK]. To cancel, select "OFF"
Setting alarm
The unit can be used as an alarm clock, CD/USB/FM is activated to play at a preset time
1. Press [SETUP] repeatedly to select "ALARM".
2. Press / to select the alarm "ON". Then press [OK], the hour blink.
3. Press / to set hour, then press [OK], the minute blink.
4. Press / to set minute, then press [OK]
5. Press / to select FM/CD/USB status. then press [OK] confirm.
Sound effects
1. Press [SOUND] repeatedly to select the sound effect
2. Press / to select the setting and then press [OK]
Programme service
Programme type
Frequency
- EN 18 -
or button until the frequency starts changing