Behringer ULTRA CHORUS UC200 Anleitung

ULTRA CHORUS UC200
Ultimate Stereo Chorus Effects Pedal
(5)
(1)
(2)
(8)
Thank you for showing your confidence in us by purchasing
the Behringer ULTRA CHORUS UC200. This ultimate effects pedal
is designed to deliver super-thick chorus with unbelievable stereo effect.
Thanks to its high-performance features you'll have full parameter
control for absolute flexibility and limitless creative options.
The chorus effect slightly detunes the original signal. A very pleasant
detune effect is created in connection with the pitch variation.
The chorus effect is used often and quite extensively used
for dispersing signals.
1. Controls
The LEVEL control adjusts the output level.
(1)
The TONE control allows you to adjust the overall effects sound
(2)
and achieve a more defined and brilliant tone.
The RATE control determines the chorus effect speed.
(3)
Turn up the DEPTH control to achieve a fuller,
(4)
deeper effect sound.
The ON/BATT LED illuminates when the effect is activated.
(5)
It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
(6)
Use this ¼" TS INPUT connector to plug in the instrument cable.
(7)
The two ¼" TS connectors OUT A and OUT B send the signal
(8)
to your amp. Use both connectors if you want to achieve
full stereo chorus effect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included).
V 1.0
A50-00002-76619
(4)
(3)
(7)
(6)