Maintanance; Weekly Maintenance; Monthly Maintenance - HEYLO PowerVent 8000 Bedienungsanleitung

Ventilator
Type PV 8000
3. Maintenance
WARNING! Turn off and unplug unit before servicing or clearing obstructions. The blade can
still rotate when the housing is unhinged and the unit is on.
Before Each Use
INSPECT POWER CORD: Inspect power cord for cuts, fraying or damage; do not use if
damaged.

Weekly Maintenance

CLEAN GRILLS: Inspect blades for dirt, dust and debris. A buildup of lint and dust will reduce
the airflow and may cause the motor to overheat and become a fire hazard. If dirty, wipe down
the blades with a damp cloth. Clean off any accumulated lint or other materials from the
protective grill cover. Use a vacuum or a damp cloth to remove lint and dust from motor and grill
covers. WARNING! Do not allow water into the motor.
EXTERIOR INSPECTION: Inspect exterior components and make sure they are properly
installed. Listen to the unit for abnormal sounds. Repair or replace components as needed.
CLEAN EXTERIOR: Clean the housing with a damp cloth. Bring back the original shine with a
vinyl cleaner/polish like those used on automobile plastics.

Monthly Maintenance

INSPECT ELECTRICAL SYSTEM: Inspect the electrical cord for damage at regular intervals.
Periodically, remove the housing and inspect internal wiring for bare wires, insecure fasteners,
and discoloration. Remove and repair any damaged wiring as needed. Failure to do so may
lead to electrical shock or a fire hazard. WARNING! Damaged wiring can cause electric shock
or fire hazard.
MOTOR BEARINGS: The bearings on all HEYLO-Dri-Eaz airmovers are permanently
lubricated. Do not oil.
Fig-No. Description
1
Duct Grill
2 Fan
3
Motor
4
Control Vane
5 Capacitor
6 Housing
10
Fig-No. Description
7
Switch plate
8 Strain relief
9
Power Cord
10
Switch
11 Foot
EN