Mellerware Tidy! Random Gebrauchsanweisung Seite 17

Error number Blinks and beeps
1
2
Fixed red
light
3
4
5
6
Flashing
red light
7
Cause of
the error
1 Beep The front wheel
is stuck.
2 Beeps Robot side
brush probably
stuck.
3 Beeps The robot fan is
clogged or the
filter is clogged.
4 Beeps The robot's
central rotating
brush cannot
rotate.
2 Beeps The bumper is
stuck.
3 Beeps The robot's
drop sensors
are dirty or the
robot is stuck to
a dark surface.
4 Beeps The robot
cannot return
to its charging
base or starting
position.
EN
What to do
Clean the
front wheel
and press the
power button
to restart the
robot.
Clean the
side brush
and press the
power button
to restart the
robot.
Remove and
empty the robot
dust container.
Clean the robot
filter.
Remove and
clean the
center rotary
brush and cap.
Check if the
bumper is
flexible.
If the robot
is on a dark
surface, start
in a new
location. If not,
clean your cliff
sensors with a
dry cloth.
Make sure
there are no
obstacles in
front of the
charging base
or starting
position. Wipe
the charging
contacts on the
charging cradle
and the robot
with a clean, dry
cloth.