HomeMatic IP HmIP-WRC6 Montage- Und Bedienungsanleitung Seite 36

Start-up
take hold of the sides of the remote control and
pull it out (see figure 2).
• Turn over the remote control.
• Remove the insulation strip from the battery
compartment. Teach-in mode remains activated
for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (F)
shortly (see figure 3).
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the device device LED
(F) lights up green. The device is now ready for use.
If the device LED lights up red, please try again.
• In the app, select in which applications you want
to use your device.
• Allocate the device to a room and give the device
a name.
36