Quick Tour; Product Description; Completing All-In-One Setup; English 3 - HP c04163617 Schnellstart

Quick Tour

1 2 3 4
5
6 7 8 9 -
r t y u i
Specifications
Power source: 100 - 240 VAC 50/60 Hz
Temperature Operating: Metric, 5°C to 35°C; U.S., 41°F to 95°F
Relative humidity (noncondensing) Operating: 20% to 80%

Product Description

This product is an All-in-One desktop computer, desktop computer, thin client computer, or retail
system and might feature a thin-panel display, TouchPad, processor, RAM, hard drive or solid state
drive and internal power supply, and external AC adapter. Depending on your computer model, the
products have a rating of 100-240 V ac, 200-240 V ac or 100- 127/200-240 V ac, 50-60 Hz or
50/60Hz, 1.5 A, 3 A, 4 A, 5.5 A, 6 A, or 8 A. The AC adapter has a rating of 100-240 Vac, 50-60 Hz or
50-60Hz, 0.5 A, 0.6 A, 0.8A, 1A, 1.2 A, 1.4 A, 1.5 A, 1.6 A, 1.7 A, 2 A, 2.2 A, 2.25 A, 2.4 A, 2.5 A, 2.7 A,
2.9 A, or 4 A. To access the latest user guide, go to http://www.hp.com/support, and select your
country. Select Drivers & Downloads, and then follow the onscreen instructions.
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, please send any suggestions, comments, or errors to docfeedback@hp.com .
Include the document title and part number when submitting your feedback.
2 English
WLAN antennas
1
Webcam
2
Webcam light
3
Internal microphone
4
Speakers
5
Settings/Menu button
6
Volume down/Minus button
7
Volume up/Plus button
8
Source/OK button
9
Power button
-
SD card reader
q
USB 2.0 connector
w
Audio-out (headphone) jack
q e
Power connector
r
w
Ethernet connector
t
USB 2.0 connectors
y
e
USB upstream connector
u
HDMI connector
i

Completing All-in-One Setup

After turning on your all-in-one:
Connect to a Network
You can connect to networks with either
a wired (Ethernet) or wireless (Wi-Fi)
connection. You cannot enable Ethernet
and Wi-Fi connections at the same time.
Wireless Network
1. Select the All Apps icon at the
bottom of the screen, and then select
the Settings icon.
2. Select Wi-Fi .
3. Select the ON button to turn the
wireless radio on.
4. Select your WLAN from the list.
5. If the WLAN is security-enabled, you
are prompted to enter a security code.
Type the code, and then:
• If proxy is not required, select
Connect .
• If proxy is required, select Show
advanced settings. Next to Proxy
settings, select None, and then
select Manual. Manually enter the
proxy settings and select Connect .
Wired Network
1. Plug the network cable into the
network jack on the all-in-one.
2. Plug the other end of the network
cable into a network wall jack.
3. Select the All Apps icon
at the
bottom of the screen, and then select
the Settings icon.
4. Select Ethernet configuration .
5. Select the ON button.
6. Select Obtain IP Address
Automatically (DHCP) or Configure
IP Address Manually .
7. Next to Proxy settings, select None,
and then select Manual .
8. Manually enter the Proxy settings .
9. Select the Save button.
Set up Your Language for
the Keyboard
Do not connect the USB keyboard until
you have reached the Android Home
screen, which displays a background
picture of a winding road.
1. Connect the keyboard to the USB port
on the rear panel.
2. Select the All Apps icon at the
bottom of the screen, and then select
the Settings icon.
3. Select Language and Input .
4. Under Physical Keyboard, select
Lite-On Technology Corp HP Android
Wired Keyboard .
5. On the resulting screen, select Set up
keyboard layouts .
6. Select your language.
7. Tap the Home icon to return to the
Home screen.

English 3