Accessories - Zenoah GZ381 Bedienungsanweisung

Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, m/s.
Recommended cutting equipment
Chainsaw model Zenoah GZ381 has been evaluated for
safety according to EN-ISO 11681-2 (Machinery for
forestry - Portable chainsaw safety requirements and
testing) and fulfills the safety requirements when
equipped with the below listed guide bar and saw chain
combination(s).
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in .
Guide bar
Length, inch Pitch, inch
15 0,325
Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
(Fig. 128)
Filing equipment and filing angles
Using Zenoah file gauge will give you the correct filing
angles. We recommend you to always use a Zenoah file
272 - 008 -

Accessories

Gauge, mm Max. nose ra-
dius
1,3 10T
GZ381
15/38
14/35
0,325 /8,25
0,050/1,3
Spur/7
23,1
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Type
Husqvarna
H30
Husqvarna
SP33G
gauge to restore the sharpness of the saw chain. The
part numbers are given in the table below.
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit www.zenoah.com
for more information.
Length, drive Low Kick-
links (no.) back
64 Yes
39