Operation - Feel-Maestro MR266 Bedienungsanleitung

EN
isolation, immediately stop using the device, disconnect
the device from the mains and apply to the nearest service
center.

Operation

Before startup
- Remove all wrap materials and stickers
- Make sure that all the parts of appliance don't have damages.
- Unwind the power cord completely.
- Place the device on a flat dry heatproof surface.
- Connect the device to the mains.
The hair must be clean, dry and brushed.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching ON as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
Ensure the voltage is correct before plugging the unit into the
power outlet.
Long press 2 seconds to boot, the machine automatically default
to 180°С work, and blinks.
Press + or - can adjust the temperature an any time for suiting
different hair types
Heat Settings up from 80°С to 230°С
The LED display will show the temperature
After the temperature reached, use the hair curler for hair
Switch off when finish using, and then remove the plug from the
socket
If do not use the curler by 1hour, the curler will auto shut-off the
power
7