Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before startup
- Remove all wrap materials and stickers
- Make sure that all the parts of appliance don't have damages.
- Unwind the power cord completely.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching ON as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
Changing the styling attachments
Remove the styling attachment by pulling it off. Place a different
styling attachment and allow it to latch in place.
Notes:
The size of curls depends on the diameter of the styling attachment.
The styling attachment with a diameter of 19 mm creates small curls
and is especially suitable for short hair.
- Before switching on the hairdryer to the power supply, make sure
that the device switch (C / Pic.1) is set to "0" (OFF).
- Connect the device to the power supply.
- Choose the desired operating mode by the Switch (C /Pic.1):
Position
of the switch
0
1
2
Operation
(OFF) - the device is switched off
First rate uses half of the power of the device, used for
delicate hair drying and for modeling.
The second speed includes the entire capacity of the
device and is used for rapid hair drying.
Function
7
EN
Werbung
