Display Brightness Setting; Distance Unit Setting - GPO RANGEGUIDE 2800 Gebrauchshinweis / Garantie

Display brightness setting

The RANGEGUIDE 2800 has 9 brightness levels for use
at ambient light levels from dusk (e.g. level 1, 2, 3) to
bright sunshine (level 7, 8 or 9).
The default setting is level 4 (LEV 4).
Switch on the instrument using the
measurement button
display brightness
conditions.
Level 1 (darkest level) is ideal for extreme
twilight and may not be visible during the
day. Simply
button to select a brighter setting that is
easy for you to read.

Distance Unit setting

The RANGEGUIDE 2800 is designed for
worldwide use. Therefore, you can
choose for the direct distance and
88888
BEST M
horizontal distance measurements to be
LAST Y
88888
HR °
M F
displayed in either meters (M) or yards
Y C
(Y).
and select the
suitable for the
use the measurement
52 52
Temperature unit setting
In addition to the direct distance in line 1,
the temperature in line 2 can also be
displayed in degrees Celsius or degrees
88888
BEST M
Fahrenheit.
LAST Y
88888
HR °
M F
Y C
Target selection behavior setting
The RANGEGUIDE 2800 offers two
operating modes: BEST for the strongest
target (best target) and LAST for the
88888
BEST M
furthest target (last target).
LAST Y
88888
HR °
M F
Y C
The BEST mode is the default and displays the object with
the strongest signal. This mode is recommended for most
applications.
The LAST mode displays the furthest distance when
scanning different objects. This mode is useful for
detecting and measuring a specific target behind a group
of objects such as bushes or trees. (Here, the most distant
signal is preferred and stronger, closer signals are
suppressed).
53 53
EN IT