Storage And Maintenance; Warranty Terms And Conditions - MD MD300 Bedienungsanleitung

2.
Remove the bolt, washer, blade and blade holder in that order
3.
Sharpen or replace the blade.
4.
Insert the blade holder, blade, washer and bolt in that order.
5.
Tighten the blade bolt with special tool. Use a piece of wood to prevent the blade
from turning around.
WARNING: A blade must be sharpened so it is in 100 % balance, otherwise it may
cause vibrations that could damage the engine. Damage to engine due to faulty
sharpening is not covered by warranty. Therefore we recommend letting a service
center sharpen the blade.

10. Storage and maintenance

Maintain your lawnmower
Check all bolts, screws, nuts and deck. Dismount the blade and the belt plastic cover
for regular cleaning. Always make sure that the blade is sharp. Keep the motor unit
free from grass and dirt. It's a good idea to take your lawn mower to an annual service
check.
Storage
• Remove the safety key and remove the battery from the mower before storing.
• Store the unit in a dry and frost-free place (10-25 °C).
• Store the battery and the unit separately.
• Charge the battery before storing the unit in winter.
• Keep the unit, in particular its plastic components, away from brake fluids, petrol,
petroleum products, penetrating oil, etc. They contain chemical substances which
may damage, attack or destroy the plastic components of the unit.
Folding the lawnmower
The handle bar can be folded down to facilitate storage and transport.
Loosen the screws of triangle knob on the upper handle and move the handle
backwards.

11. Warranty terms and conditions

The warranty period is 2 years for private end users in DE.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are NOT covered by the warranty.
26