Maintenance And Storage - MD MD300 Bedienungsanleitung

Do not operate the machine when barefoot or wearing sandals.
Exercise extreme caution when changing direction on slopes.
Never attempt to make any adjustments, while the engine is running.
Use extreme caution when reversing or pulling the machine backwards
Due to vibrations from the handle, long time use can result in white fingers.
If fatigue is felt in arms, hands or fingers – or visible signs of white fingers is
appearing, the work should be stopped immediately, and a sufficient time of break
should be taken for recovery. To avoid white fingers, each user should operate the
machine for no more than 1.5 hours per day.

Maintenance and storage

The engine shall be stopped when carrying out maintenance and cleaning
operations, when changing tools and when being transported by means other than
under its own power.
Check regularly that all bolts and nuts are tightened. Retighten if necessary.
The engine must be completely cooled before storing indoors or covered.
If the machine unused for a period of time, please refer to the instructions in this
manual.
Maintain or replace safety and instruction labels, as necessary.
Only use orginal spare parts or accessories. If not orginal parts or accessories is
used, the liablility is no longer applied.
Charge the battery before a long time storage.
Miscellaneous
Factory-fitted control devices, such as the handlemounted clutch cable, must not
be removed or exposed.
Ensure that the machine is properly secured when transported on a flatbed etc.
Waste electrical products must not be disposed of with the household
waste. This tool should be taken to your local recycling centre for safe
Li-ion
treatment.
The lawnmower is manufactured according to the latest safety requirements. These
include a blade brake that stops the motor and blade in 3 seconds when the blade
brake. Every precaution is only effective when it is followed exactly. Use the following
description when you mount your lawnmower.
18